|Automatic Grade||Automatic, Semi-Automatic|
|Flow Rate||900 LPH|
|Dimensions (mm)||750 X 600 X 950|
The Kleenoil Filtration System is a multi-purpose fluid cleaning system, which is available in different models. The system can be used to clean most mineral oils such as hydraulic, gear and transmission oils, diesel type fuels and many soluble oils and fluids. In its static form, it can be permanently connected to large fluid reservoirs where the machines and engines are in constant use. As a mobile trolley it has a wide variety of applications, such as oil and fuel transfer and rotational cleaning of factory machinery.Operating principle - In despth filter:
The kleenoil Filter Cartridges are made of densely wound pure coniferous long fiber wood pulp paper and manufactured by kleenoil UK itself. The filter cartridges act both by “Absorption and Adsorption” In a continuous recycling process.
The long fiber of the paper attracts the water formed either through the combustion process or by condensation and absorb it like a sponge, at the same time rejecting the large oil molecules, which are forced to pas between the tight winding of the cartridges.
As the oil passes through the cartridge, minute carbon, wear metals and silicon are extracted from the oil by adhering to any of the surfaces of the filter – A process known as adsorption.
The filter cartridge has an additional “Polypropylene disc” at the bottom to remove any particle that may pass through- offering a second stage of filtration.
|Filtration System Code||1XSDU9788||2XSDU9788||4XSDU9788||6XSDU9788||8XSDU9788|
|ELECTRIC MOTOR||0.37 KW /0.5HP / 415v, 3 Phase 1450rpm||0.37 KW /0.5HP / 415v, 3 Phase 1450rpm||0.37 KW /0.5HP / 415v, 3 Phase 1450rpm||0.75 KW /0.75HP / 415v, 3 Phase 1450rpm||1 KW /1.0HP / 415v, 3Phase 1450 rpm|
|*FLOW RATE||300 LPH||600 LPH||900 LPH||1200 LPH||2400 LPH|
|DIMENSIONS (mm)||1100 X 600 X 700||1100 X 600 X 700||1100 X 600 X 950||1100 X 600 X 1200||1100 X 600 X 1450|
Removes contaminant particles down to less than 0.5 microns
Removes water content from oil to less than 0.25% up to capacity of cartridges
Prevents corrosion of components
Reduces component wear (seals, piston rods, pumps etc.)
Reduces the incidence of sticking & worn value components
Extends life of in-line OEM filters and components.
End to the need to change hydraulic fluids
All properties of oil being cleaned are maintained
Filter cartridge can be changed within minutes.
No machine downtime as oil is cleaned continuously while machine is in operation
Simple to operate
Used in industries world-wide
Can be used with virtually any petroleum/synthetic based oil